25 DESIGN & ENGINEERING
Wednesday, April 4, 2012
Oil Tank Mount
›
With everything on a bike being an exercise in 3-D packaging, the fastest and easiest way is to create a solid model of wha...
Monday, February 20, 2012
Rear Caliper Tab
›
Rear brake caliper mount was machined 3 yrs ago or so. I finally got around to whippin' up the weld on mount, and anti rotate...
Battery Box
›
Battery box time. I started with a Twin Cam softail fitting, H-D battery. I already have a TC era softail, so I will have always have an...
Sunday, August 21, 2011
Fender Struts
›
Fender struts machined from 304 Stainless, 3/16" Thick, 1.5" wide. It seemed too thick when I received the material in. But in pro...
Wednesday, April 13, 2011
Fender Up
›
Fender is coming together. Bungs are in place. Top, bottom and sides are cut. Looks like the side radius does not match the tire from the pi...
Sunday, April 10, 2011
Mock Up Full Bike
›
Lookin' good, I am diggin' the proportions and the feel of it. It is starting to look like the vision I have always had in my head. ...
Rear Fender
›
Fender work, you can see in the top pictures that the fender has a peak to it around the seam. Well this is much less than I started with. I...
3 comments:
›
Home
View web version